Nobody likes a clogged bathtub drain. It’s not only frustrating, but it can also be a huge hassle. If you’re looking for an easy way to unclog your bathtub drain, look no further! In this article, we will provide a step-by-step guide on how to unclog your bathtub drain using some simple tools and supplies. So don’t wait any longer – follow these steps and get that clog cleared up in no time!
Table of Contents
1. Use a Plunger to Unclog a Bathtub Drain
.If you have a plunger, this is usually the first tool you’ll want to try when attempting to unclog a bathtub drain. This is an effective method because the plunger creates a seal around the drain, which then allows you to generate enough force to dislodge the clog.
You will need:
- A plunger
- Some hot water
Instructions:
- Fill the bathtub with enough hot water to cover the plunger. This will create a seal around the drain and make it easier to generate enough force.
- Place the plunger over the drain and push and pull it up and down vigorously. Be sure to keep the plunger submerged in the water as you do this.
- After a few minutes of plunging, you should feel the clog start to loosen.
- Once the clog is loose, continue plunging until it is completely dislodged and can be flushed away.
2. Clear the drain by pouring in baking soda and vinegar
If you don’t have a plunger, you can try using a mixture of baking soda and vinegar to free the drain of debris. This method is effective because baking soda and vinegar create a chemical reaction that helps to break down the clog.
You will need:
- A cup of baking soda
- A cup of white vinegar
Instructions:
- Start by pouring a cup of baking soda down the drain.
- Follow the baking soda with a cup of white vinegar.
- Cover the drain with a plug or lid to keep the mixture inside.
- Let the mixture sit for 15-20 minutes.
- After 15-20 minutes, remove the plug or lid and run hot water down the drain to flush away the clog.
3. Use a wire hanger to get out any objects
If you can see or feel an object that is causing the clog, you can try to remove it with a wire hanger. This technique works because it allows you to remove the item from the drain directly.
You will need:
- A wire hanger
Instructions:
- Start by unbending the wire hanger so that you have a long, thin piece of wire.
- Carefully insert the wire into the drain and feel around for the object that is causing the clog.
- Once you’ve found the object, try to hook it onto the end of the wire and pull it out.
4. Unclog a bathtub using a snake
A snake is a long, flexible piece of wire that can be used to remove clogs from drains. This is an effective method because it can reach deep into the drain and break up the clog.
You will need:
- A snake (you can find these at most hardware stores)
Instructions:
- Start by feeding the snake into the drain.
- Push the snake down into the drain until you feel resistance. This is usually when you’ve reached the clog.
- Once you’ve reached the clog, start twisting the snake back and forth to break up the clog.
- Continue twisting and pushing the snake until the clog is broken up and can be flushed away.
5. Turn off the water supply to fix a clog
One of the most common causes of clogged drains is a build-up of hair. If you think this may be the cause of your clog, you can try to fix it by turning off the water supply and removing the drain cover. This will allow you to remove any hair that may be causing the clog.
You will need:
- Pliers or screwdriver
Instructions:
- Start by turning off the water supply to your bathroom. This is usually done by turning the knob to the right.
- Once the water is turned off, use a pair of pliers or a screwdriver to remove the drain cover.
- Carefully reach into the drain and remove any hair or debris that you see.
- Once the drain is clear, replace the drain cover and turn on the water supply.
6. Use dish soap and hot water for the drain
If you have dish soap and hot water, you can try this method to unclog your drain. The dish soap will help to break down the grease and debris that may be causing the clog.
You will need:
- A cup of dish soap
- Some hot water
Instructions:
- Start by pouring a cup of dish soap down the drain.
- Follow the dish soap with a pot of hot water.
- Let the mixture sit for 15-20 minutes.
- After 15-20 minutes, run hot water down the drain to flush away the clog.
7. Try using a vacuum cleaner to clear debris
If you have a vacuum cleaner with a hose attachment, you can try using it to clear the drain. This method is effective because it will create suction that can help to remove the clog.
You will need:
- A vacuum cleaner with a hose attachment
Instructions:
- Start by placing the vacuum cleaner over the drain.
- Turn on the vacuum cleaner and let it run for a few minutes.
- After a few minutes, turn off the vacuum cleaner and remove the hose.
- Check to see if the clog has been removed. If not, repeat this process until the clog is gone.
8. Use boiling water to eliminate objects from a drain
Boiling water can be used to remove objects from a drain. This is a successful approach since it will melt any grease or debris that could be blocking the drain.
You will need:
A pot of boiling water
Instructions:
- Carefully pour the boiling water down the drain.
- Let the boiling water sit for 15-20 minutes.
- After 15-20 minutes, run more water down the drain to flush away the clog.
9. Try using a chemical drain opener
A chemical drain opener is typically a last resort because it can be harmful to your pipes. However, if you’ve tried all of the other methods and nothing has worked, you can try using a chemical drain opener.
You will need:
A chemical drain opener
Instructions:
- Start by following the instructions on the bottle of drain opener.
- Pour the drain opener into the drain.
- Let the drain opener sit for 15-20 minutes.
- After 15-20 minutes, run hot water down the drain to flush away the clog.
10. Contact a professional
If you’ve tried all of the other methods and still can’t clear a blockage, you might want to call a professional. A professional will be able to remove the obstruction and ensure that the drain is operating normally.
Summary
There are a variety of ways that you can unclog a bathtub drain. Some of the best methods include using a plunger, a drain snake, or boiling water. These steps are effective because they will break down the grease and debris that may be causing the clog. If you have tried all of these methods and still can’t clear the blockage, you might want to call a professional. Thanks for reading! We hope this article was helpful.
